Broadcrown Power Engineering breathes new life into 25-year-old pumping station generator
A bespoke canopy replacement has helped protect a Broadcrown standby generator installed in 1999, extending the viability of the existing installation while ensuring a critical wastewater pumping station remained protected throughout the works.
When Broadcrown Power Engineering was contacted to assess an ageing generator installation at a pumping station on the south coast, the generator itself was still considered a reliable unit. The problem was the enclosure protecting it.
Originally installed in 1999, the generator had spent more than 25 years operating in a challenging coastal environment. Over time, exposure to sea air had resulted in significant corrosion to its drop-over canopy. The deterioration was not solely cosmetic, with corrosion also evident internally and the potential to eventually compromise the protection and operation of the generator.
A critical standby installation
The site operates as a local wastewater and sewage pumping station, handling foul and surface water flows. This made the reliability and availability of the standby generator particularly important.
In the event of a mains power failure, the generator is required to support the pumps. If it were unavailable when needed, there would be a risk of sewage backing up and potentially overflowing.
Broadcrown Power Engineering discussed replacing the complete generator, however, the end customer was keen to retain the existing set, which had proved reliable and had recently undergone a control system upgrade.
The project therefore required a different approach: replace the deteriorating canopy while retaining the original generator and keeping it available for emergency operation throughout the works.
Planning around an operational generator
Before work began, Broadcrown Power Engineering carried out a detailed site survey to establish the sequence in which the existing canopy services could be disconnected while allowing the generator to remain operational when required.
One advantage of the original installation was its drop-over canopy design. Rather than being mounted within an enclosure with an integral floor, the generator sits directly on a concrete slab, allowing the canopy to be removed from around it.
The existing exhaust system was connected to the internal roof of the enclosure, so this was disconnected at the engine and removed with the old canopy. A new exhaust system was supplied as part of the replacement installation.
Small power and lighting were disconnected at the consumer unit before being reconnected to the new canopy, while new ductwork connected the generator’s radiator to the new attenuator.
Keeping standby power available
The greatest consideration throughout the project was maintaining the site’s emergency power capability.
While work was taking place, the generator was isolated so the canopy could be safely removed and replaced. However, the project was planned so that the generator could quickly be returned to automatic operation if mains power failed.
At the end of each working day, the set was returned to automatic mode. The team had also been instructed that, should a mains failure occur while work was under way, work would stop and the generator would be returned to automatic operation to support the pumping station.
This approach meant there was no requirement to hire a temporary generator, reducing additional equipment and disruption while maintaining a clear contingency for the critical site.
A bespoke replacement for the original installation
Although now part of Greenshields JCB, Broadcrown Power Engineering still has access all original manufacturing drawings, allowing a replacement enclosure to be manufactured specifically around the existing installation.
Given the coastal location that had contributed to deterioration of the original canopy, corrosion resistance was an important part of the specification. The new enclosure was externally finished with a C5M paint system suitable for a coastal environment.
A Hiab was used to lift the old drop-over canopy clear of the generator before positioning the new enclosure over the existing set. Despite the installation being situated within a car park, there were no significant lifting restrictions, and the surrounding area was cordoned off while lifting operations took place.
The physical works were completed by our engineers over three days.
Protecting an existing asset
The finished project allowed the customer to continue using its existing generator while replacing the component most affected by more than two decades of exposure to the coastal environment.
While the age of the generator means its remaining operational lifespan cannot realistically be predicted, the new canopy removes one significant threat to its condition by helping protect it against accelerated corrosion.
The transformation has made a visual difference too. A local resident who had previously complained that the deteriorated enclosure was an eyesore visited the site to take a look at the newly installed canopy with approval.
The result
The project demonstrates how Broadcrown Power Engineering can apply knowledge of legacy generating equipment to develop a practical solution around an existing installation. By combining the original design information with careful site planning and a bespoke replacement canopy, the project retained a proven generator, reduced the need for more extensive replacement works and, most importantly, maintained standby protection for a critical wastewater facility.
